There is a trick to save money when heating water. It involves placing aerators at the mouth of the taps . These inject air into the water outlet, making the sensation of flow the same. In this way, water consumption is reduced by up to 60% and of course, so is the energy used to heat it.
In autumn there are fewer hours of daylight and this can take away energy from our daily lives. That is why it is important to have pleasant rooms, with optimal lighting but guaranteeing minimum light consumption . The key is to combine efficient light bulbs and lamps taking into account the needs of each room. We review some tips for the main ones:
In the living room: you need between three and ten light sources . For example, in the TV area, you can place a dim light behind the TV and pointing at the wall to avoid eye fatigue and reduce buy whatsapp phone number list the contrast between light and shadow. If you have a dining table, choose a ceiling lamp 55 or 60 cm above the table surface. And in the reading or work corner, a brighter light is better.
For general lighting, compact fluorescent lamps (11W to 20W) or LED lamps (7W) can be used.
In the kitchen: the light sources should be on the countertops and the cooking area, because that is where we do more specific work, in the tall cabinets or on the kitchen table.
General lighting can be provided by fluorescent tubes or low-consumption lamps, 15 W or 20 W, depending on the size of the kitchen and the number of lamps.
In the bedrooms : the best combination is good general lighting reinforced with specific points, such as on the bedside table or in the dressing room.
At night, do not leave incandescent lamps on in the children's room. It is better to use decorative LEDs and achieve dim lighting.
In the bathroom : we recommend general lighting with fluorescent lamps and more specific lighting on the mirrors , for example with spotlights on the top or on both sides.
Image
7. Check the gas boiler and radiators
Before the intense cold arrives, it is the ideal time to prepare our heating system and tune up the boiler.
It is always advisable to bleed radiators to remove the air that accumulates during the months when they are not used. This will ensure they work as efficiently as possible. If you have automatic bleeders, this is not necessary, as the air is expelled automatically.
If you have electric stoves , clean them and make sure they work properly.
Remember to keep radiators clear . If you had placed furniture or curtains near them in summer, move them around. Nothing should cover or obscure radiators if we want to take advantage of all the heat they emit.
Did you know that a boiler can account for up to 25% of a home's annual energy expenditure?
To check that the boiler is working correctly , first turn it on and check that the “ winter heating ” mode is selected. If it is a mixed boiler, remember that there are three modes: hot water only, heating only or heating and hot water. The “winter heating” mode would be this last combination.
Next, check the pressure . On most models, it is between 1.2 and 1.5 bar. If it is less than 1 bar, you will need to operate the heating filling valve at the bottom. Do this anti-clockwise and slowly.
Once the correct pressure has been reached, close the valve by turning it clockwise. If the pressure is too high, you may need to bleed the radiators.
Finally, choose the temperature you want, program it and your boiler will be ready to operate.
